Home Battery Savings Calculator

Model your real numbers in about 30 seconds: likely savings, honest payback, and backup hours, with the incentives you actually qualify for. Free, no email.

The Home Battery Report
Worth It? Calculator
Step 1 of 5Free · No email to see your result

Where do you live?

Electricity rates and incentives vary wildly by state: it is the single biggest factor.

More states coming soon. Numbers above are fully modeled for these states.

How the calculator works

Scope. The calculator runs one model for California, Texas and Florida, the states where we hold a sourced, dated average residential rate. Everything below is a summary; the methodology page states every formula, weight and threshold in full.

Savings. We take a share of your yearly bill as the battery's yearly value: 22 percent with solar, 16 percent if you are planning solar, and 8.5 percent without. That share is scaled by your state's average rate against 17 cents per kWh and adjusted for your main goal. The result is a range, from 80 percent to 124 percent of the central estimate, because one figure would claim more precision than these inputs carry.

Payback. Payback is the installed cost of one mainstream battery, $14,200, divided by the central savings estimate. No state rebate is modelled at present, and a 2026 cash buyer gets no federal purchase credit, because Section 25D ended on December 31, 2025. A payback longer than 15 years shows as 15+.

Backup hours. Backup hours are 13.5 kWh of usable capacity divided by the total draw of the loads you pick, using a typical average draw for each, such as 0.15 kW for a refrigerator. No efficiency loss is deducted, so read the figure as an upper estimate, not a promise.

Verdict. The score runs from 6 to 94 and moves with your solar status, your state's rate, your goal, your bill size, a medical-device load and the payback band. A score of 66 or more reads Worth it, 42 to 65 reads Marginal, and below 42 reads Probably not. The weights are our editorial judgment of what matters, not a statistical model.

What it leaves out. It uses your state's average rate, not your own rate plan, so it does not see your time-of-use windows. It does not count export credits or any utility or virtual power plant payment in the savings figure, and it does not price a specific installer's quote. Each of those can move the answer either way, which is why the state reports and program guides sit alongside it.

Rates used. California 33.61 cents, Texas 15.88 cents, Florida 15.03 cents per kWh, from the U.S. Energy Information Administration's Electric Power Monthly, Table 5.6.A (July 2026 data).

Read the full methodology, with every formula and weight →

Home Battery Calculator: Payback and Savings (2026) | The Home Battery Report